System Sensor P2RK 2-Wire - Outdoor Horn Strobe Red (FREE Fast Shipping)

Description

System Sensor P2RK 2-Wire, Outdoor Horn Strobe Red
SpectrAlert Advance offers the broadest line of outdoor horns, strobes, and horn strobes in the industry. With white or red plastic housings, wall or ceiling mounting options, and plain or FIRE-printed devices, SpectrAlert Advance can meet virtually any application requirement, including indoor, outdoor, wet, and dry applications in temperatures from -40ºF to 151ºF.
Like the entire SpectrAlert Advance line, outdoor horns, strobes, and horn strobes for wall applications include a variety of features that increase application flexibility and simplify installation. First, field-selectable settings, including candela, automatic selection of 12- or 24-volt operation, horn tones, and three volume options enable installers to easily adapt devices to meet requirements.
Next, SpectrAlert Advance devices use a universal mounting plate for both wall and ceiling applications. This mounting plate includes an onboard shorting spring that ensures wiring continuity before devices are installed, so installers can verify proper wiring without mounting the devices and exposing them to potential construction damage. Once the plates are mounted, all SpectrAlert Advance devices utilize a plug-in design with a single captured screw to speed installation and virtually eliminate costly ground faults.
Outdoor devices ship with weatherproof plastic back boxes (metal back boxes are available separately) that accommodate in-and out wiring for daisy chaining devices. Plastic back boxes feature removable side flanges and improved resistance to saltwater corrosion. Knock-outs located on the back eliminate the need to drill holes for screw-in mounting. Plastic and metal weatherproof back boxes come with 3/4 inch top and bottom conduit entries and 3/4 inch knock-outs at the back. A screw-in NPT plug with an O-ring gasket for a watertight seal is included with each back box.
Features
Weatherproof Per Nema 4X, Ip56
Listed To UL 1638 (Strobe) & UL 464 (Horn)
Compatible With System Sensor Synchronization Protocol And Legacy Spectralert Products
Field-selectable Candela Settings: 15, 15/75, 30, 75, 95, 110, 115, 135, 150, 177, And 15
Automatic Selection Of 12- Or 24-volt Operation At 15 & 15/75 Candela
Rotary Switch For Horn Tone And Three Volume Selections
Horn Rated At 88+ dBA At 16 Volts
Rated From -40ºF To 151ºF
Universal Mounting Plate With An Onboard Shorting Spring The Tests Wiring Continuity Before Devices Are Installed
Plug-in Design With Minimal Intrusion Into The Back Box
Tamper-resistant Construction
Listed For Ceiling Or Wall Mounting
SpectrAlert Advance Outdoor Horn, Strobe, and Horn StrobeSpecifications
Architect/Engineer Specifications
General
SpectrAlert Advance outdoor horns, strobes, and horn strobes shall mount to a weatherproof back box. A universal mounting plate shall be used for mounting ceiling and wall products. The notification appliance circuit wiring shall terminate at the universal mounting plate. Also, SpectrAlert Advance products, when used with the Sync-Circuit Module accessory, shall be powered from a non-coded notification appliance circuit output and shall operate on a nominal 12 or 24 volts. When used with the Sync-Circuit Module, 12-volt-rated notification appliance circuit outputs shall operate between 8.5 and 17.5 volts; 24-volt-rated notification appliance circuit outputs shall operate between 16.5 and 33 volts. Outdoor SpectrAlert Advance products shall operate between -40 and 151 degrees Fahrenheit from a regulated DC or full-wave rectified unfiltered power supply. Strobes and horn strobes shall have field-selectable candela settings including 15, 15/75, 30, 75, 95, 110, 115, 135, 150, 177, and 185.
Strobe
The strobe shall be a System Sensor SpectrAlert Advance Model _______ listed to UL 1971 and shall be approved for fire protective service. The strobe shall be wired as a primary-signaling notification appliance and comply with the Americans with Disabilities Act requirements for visible signaling appliances, flashing at 1 Hz over the strobe's entire operating voltage range. The strobe light shall consist of a xenon flash tube and associated lens/reflector system. The strobe must be installed with its weatherproof back box in order to remain outdoor approved per UL. The strobe shall be suitable for use in wet environments.
Horn Strobe Combination
The horn strobe shall be a System Sensor SpectrAlert Advance Model _______ listed to UL 1971 and UL 464 and shall be approved for fire protective service. The horn strobe shall be wired as a primary-signaling notification appliance and comply with the Americans with Disabilities Act requirements for visible signaling appliances, flashing at 1 Hz over the strobe's entire operating voltage range. The strobe light shall consist of a xenon flash tube and associated lens/reflector system. The horn shall have three audibility options and an option to switch between a temporal three pattern and a non-temporal (continuous) pattern. These options shall be set by a multiple position switch. On four-wire products, the strobe shall be powered independently of the sounder. The horn or horn strobe models shall operate on a coded or non-coded power supply. The horn strobe must be installed with its weatherproof back box in order to remain outdoor approved per UL. The horn strobe shall be suitable for use in wet environments
.
Physical/Electrical Specifications
Operating Temperature
-40°F to 151°F (-40°C to 66°C)
Strobe Flash Rate
1 flash per second
Nominal Voltage
Regulated 12 DC/FWR or regulated 24 DC/FWR1
Operating Voltage Range2
8 to 17.5 V (12 V Nominal) or 16 to 33 V (24 V Nominal)
Operating Voltage with MLD3 Sync Module
8.5 to 17.5 V (12 V Nominal) or 16.5 to 33 V (24 V Nominal)
Input Terminal Wire Gauge
12 to 18 AWG
Wall-Mount Dimensions (Including Lens)
5.6" L × 4.7" W × 2.5" D (142 mm L × 119 mm W × 64 mm D)
Horn Dimensions
5.6" L × 4.7" W × 1.3" D (142 mm L × 119 mm W × 33 mm D)
Wall-Mount Weatherproof Back Box Dimensions
5.7" L × 5.1" W × 2.0" D (145 mm L × 130 mm W × 51 mm D)
Simple To Install.
Installation Ease With An Aesthetic Design.
The only AV products with plug-in designs, aesthetic and functional consistency, and field-adjustable settings across the entire line, SpectrAlert Advance enables you to meet the widest range of notification requirements and specifications in the industry.
With SpectrAlert Advance, you can take on any project with confidence, knowing you can meet requirements while maximizing the efficiencies of using a single product line. Whether for emergency communications projects, small notification systems, or anything in between, SpectrAlert Advance products, tools, and accessories simplify the entire user experience - from planning and selection to training, installation and maintenance - saving you time and money while protecting the lives of your customers.
Multiple Installation Options.
Most Reliable and Best Looking Installation Options.
SpectrAlert Advance® Outdoor products can be mounted directly on wall surfaces using the side flanges provided, which maintains the seal integrity of the product. In addition, the back boxes can be mounted on 2x4 and 4x4 electrical junction boxes.
Install Your Device Where You Need It.
Not just outdoor! Our products are best for specialty applications such as parking garages, pool rooms, roof tops, and more! Anywhere where devices are exposed to the elements, humidity, or extreme temperatures.
Notes:
1. Full Wave Rectified (FWR) voltage is a non-regulated, time-varying power source that is used on some power supply and panel outputs.
2. 2. P, S, PC, and SC products will operate at 12 V nominal only for 15 and 15/75 cd.