Ductless Split Air Conditioner Heat Pump, 12000 x 2 +18000 BTU: Ceiling Cassette

Description

Mini Ductless Split Air Conditioner 24000 BTU Cassette
42000 BTU TRI Zone Mini Split AC - CEILING
22.5 SEER Efficiency w/ Heat Pump Technology
This 48000 BTU TRI Zone INVERTER mini split AC
with Ceiling Cassette can cool or heat THREE separate zones (18000 + 12000 + 12000 BTU) for a total coverage area of 2100 ft² (900 ft² + 600 ft² + 600 ft² areas). The Air handlers are discreetly recessed into a ceiling panel - only the grill is visible. 22 SEER Inverter technology with ENERGY STAR Certification provides the benefits of low operation temperatures, rapid cooling / heating, as well as maximum energy efficiency. R410A Pre-charged - 3 X 15' Copper Installation linesets Included.
Technical Data:
System Includes:
42,000 BTU
INVERTER
Cooling Capacity (12+12+18)
42,000 BTU INVERTER Heat Pump Capacity (12+12+18)
22 SEER - 10 HSPF
- AHRI / ENERGY STAR Certified
*
Pre-Charged with ECO-Friendly R410A
1 Year Parts - 5 Year Compressor Warranty
View Details >
Indoor Unit - CEILING CASSETTE Air Handlers
[x3]
Outdoor Unit - 42,000 BTU Compressor.
Digital Multi-function LCD Remote Controls.
Wall Mounted thermostat.
15ft Copper Refrigeration Linesets
[x3]
Filtration Screens - Multi Folds Evaporator
.
Product and Installation Manual. >>>
Top Line Features:
22 SEER - 10 HSPF
- ENERGY STAR
Most Energy Efficient Dual-Zone Series on Market
TRI Air Handlers
Mounts Discreetly in Ceiling
Dry-Mode removes moisture w/o affecting room temp
Cross Flow Technology reduces noise output
Compatible with over 5 Filtration medias
COMPRESSOR BELT Hyper heats for Maximum Heat
Low Ambient Temperature Operation (-13° F)
Restart IC: Settings restored Following Power Outage
Follow-Me Function tracks Remote Location
The particle filter or “pre-filter” removes dust and other air-borne pathogens before pushing the air through additional filtration medias and the refrigeration coil array.  This filter is washable and comes factory installed with every ductless air conditioner system.
The open channel construction of the 3M High Air Flow (HAF) filter offers low initial airflow resistance, while its unique microstructure and electrostatic charge provides effective particle capture and retention. This translates into fewer filter change outs and reduced coil cleaning.  CLICK TO PURCHASE >>>
The Vitamin C Filtration media releases Vitamin C into the air which softens skin and reduces stress among other therapeutic benefits.  A good choice for those wanting to add some invigoration to their indoor air environment.  Filter lasts over 2 years.  CLICK TO PURCHASE >>>
The anti-microbial effect of silver ionic technology kills allergy causing bacteria by destroying the inner configuration elements of the cell body. The nano-silver attached to the filter screen constantly releases silver ions which directly eliminates and prohibits bacteria from replicating.  CLICK TO PURCHASE >>>
Eliminates odors such as ammonia and deactivates harmful chemicals has such as formaldehyde.  By forming positive positions on the filter surface, Electrostatic Fiber traps small dust particles, smoke and pet dander to prevent allergic reactions and neutralize odor in the air.  CLICK TO PURCHASE >>>
Indoor Unit (evaporator) specs CLICK FOR FULL SPEC SHEET
Model Number
T3-OS212-EC
Capacity
12000 BTU
Air Flow (Hi/M/Lo)
620/520/410 (m3/h)
Power Supply
230 V / 60 Hz / 1Ph
Noise Output (Hi/M/Lo)
50/47/43 dBA
Liquid / Gas
1/4" x 1/2"
Weight
39 lbs
Body Dimensions (W x D x H)
22.44" × 22.44" × 10.24" inches
Panel Dimensions (W x D x H)
25.47" x 25.47" x 2" inches
VIEW FULL AIR HANDLER SPECIFICATION SHEET >>>
Indoor Unit (evaporator) specs CLICK FOR FULL SPEC SHEET
Model Number
T3-OS218-EC
Capacity
18000 BTU
Air Flow (Hi/M/Lo)
620/520/410 (m3/h)
Power Supply
230 V / 60 Hz / 1Ph
Noise Output (Hi/M/Lo)
50/47/43 dBA
Liquid / Gas
1/4" x 1/2"
Weight
45 lbs
Body Dimensions (W x D x H)
25.47" x 25.47" x 2" inches
Panel Dimensions (W x D x H)
22.44" × 22.44" × 10.24" inches
VIEW FULL AIR HANDLER SPECIFICATION SHEET >>>
Outdoor Unit (condenser) specs CLICK FOR FULL SPEC SHEET
Model Number
T323D-H248
Compressor Brand
MITSUBISHI / GMCC
Rated Capacity
36000 BTU
Maximum AH Capacity
48000 BTU
Air Flow
2355 CFM
Power Supply
230 V / 60 Hz / 1Ph
Input Power
2600W - 3800W
Max Fuse
45A
SEER
22.5
EER
10.9
HSPF4
10.3
Sound Level
65 dBA
Operating Temp Range
-13 - 122 F (cool and heat)
Refrigerant
R410A / 105oz Charge
Liquid / Gas
1/4" x 3/8" (4)
Max Lineset Length (1 zone)
98 ft
Max Lineset Length (all zones)
197 ft
Weight
156.3 lbs
Dimensions (W x D x H)
37.25 × 16.14 × 31.89 inches
Install Kit Contents:
15 Feet Flared Copper Tubing
x 3
15 Feet Pipe Insulation
x 3
Drain Pipe (outdoor)
Outdoor
Condenser Rubber Feet pads
Wall Bracket for Indoor Unit
x 3
Brass Adaptors
for Alternate lineset sizes
Installation Manuals and Remote-Batteries
** Extend included 15 foot copper lineset to 30-40-50-65 feet. Just .50 / ft **
*** DOES NOT INCLUDE ELECTRICAL WIRE BETWEEN INDOOR > OUTDOOR. WILL NEED 16/4
:
Click to Purchase >>>
WHAT IS DC INVERTER?
DC Inverter Air Conditioners are the ultimate cooling and heating technology of the HVAC field.  They are called "DC inverter" because the alternative current (AC) is converted to Direct Current (DC) then, direct current inverted back to Alternative current with desired frequency. As known, the current supplied through the wall outlet has fixed frequency which is 60 Hertz. Different frequencies supplied to the compressor will result different running speeds of the compressor.  YMGI Inverter control systems use Pulse Amplitude Modulation (PAM) that is the most advanced and energy efficient method of inverting the current.  DC Inverter air conditioners bear special compressors that their speed could be changed by increasing or decreasing the frequency of the supplied power.  Therefore, unlike conventional split Air Contioners/Heat Pumps which cycle between on and off repeatedly, the DC Inverter control system will monitor the room temperature and adjust the compressor speed automatically.
Conventional compressors turn on and off to maintain the room temperature at desired level.  This will result compressor to draw tremendous energy each time it starts up. This will also reduce the life-span of the compressor and other components that are turning on and off.  Once a conventional system is running, it runs at its maximum speed, consuming the maximum amount of energy in order to produce the maximum of cooling or heating to maintain the desired temperature.  The system will then cycle between on and off in an effort to maintain this temperature. When a DC Inverter compressor initially starts up, it runs with a higher speed to bring the room temperature to desired level rapidly. Once the set temperature is reached, it slows down and adjust its capacity to counter the heat loss or heat gain of the building. By this way it will maintain a constant temperature.
BASIC OVERVIEW:
The installation of a ceiling cassette is much like that of a ductless mini split with the exception that instead of a wall mounted air handler, a ceiling cassette mounts in the ceiling usually as a flush mount or in a drop ceiling. The indoor unit (ceiling cassette) and outdoor unit (condenser) are connected to each other by means of refrigerant copper tubing and electrical cables that are routed through the ceiling and outside to the condenser outputs via a 2-3 inch hole. The compressor comes pre-charged with freon however, procedures such as conducting leak tests etc. are still important steps in ensuring proper functioning of a ceiling cassette system. Click for Installation Tip *Although the installation may seem easy to some, certain tools and experience is necessary to complete installation of a ceiling cassette system.  Click to Download Installation manual.  A certified HVAC technician must conduct / complete the installation to be eligible for product warranty. (See warranty details below > )
*5 Year Compressor - 1 Year on all other Parts*
Registration card will be sent with unit, this card should be completed by an HVAC technician (installer).  Installation of a mini split must be completed by a licensed HVAC (Heating, ventilating, & air conditioning) company to ensure any issues encountered in the future are not due to improper installation / workmanship.  Even though mini split setup is below the expertise requirements of central AC systems, these are not "plug-n-play" units that can be properly installed without certain tools any prior HVAC - electrical knowledge.   The installation includes electrical, gas, and refrigerant connections and generally regulated by a multiple sets of laws, codes and guidelines, at the federal, state and local levels. The failure to properly install HVAC equipment can raise personal safety and performance concerns. Warranty service - troubleshooting is provided through the contractor / installer and will be upheld as long as policies are observed.  Once a non-defective unit is installed by a HVAC company, chances of anything going wrong are very slim and almost all contractors will guarantee there workmanship and provide future service free of charge (installation warranty).  If it was determined that the unit is not functioning due to a defect and needs to be replaced, the part will be sent free of charge up to 1 year from date of purchase or 5 years for the compressor. If you receive a damaged or defective product, a replacement unit will be sent out Free of cost.  Damaged / Defective product will be picked up and brand new exchange will be shipped out. Download Warranty Registration >
SHIPS TO TO BOTH UNITED STATES AND CANADIAN LOCATIONS!
Our Thermocore systems ship via RL Carriers or similar LTL freight service out of Oak Park, Michigan and are palletized onto a single skid.  Transit time is usually between 4 to 6 business days from payment receipt depending on where you are geographically located.
Please provide a contact phone# upon checkout
(to be used for delivery purposes only).  SOMEBODY MUST BE ON SITE TO ACCEPT / SIGN FOR Order.  Failure to provide valid contact# will delay order.  System comes with Free shipping - this includes delivery to any location within the Continental United States. We will ship to Canadian locations but we need to quote separately - please contact our offices.  Additional freight for Canadian registries is usually around 0. (import and duties may apply).
Condenser Ground Stand
- Provides Flat even surface
- Avoids debris obstruction
Price:
.00
Click for more Info
Lineset (1/4 x 1/2)
- Required for Installation
25ft - 30ft - 40ft - 50ft
Lengths
Price:
.00 > 4.00
Click for more Info
Condenser Bracket
- Mount your condenser at any height on an outdoor sidewall
Price:
.00
Click for more Info
Micro-Pump II
- Required when mounting air handler on Interior wall
Price:
2.00
Click for more Info
Electrical Wire Harness
- 16/4 Electrical Wire Harness
- For Extending Evap. Length
Price:
.65 / ft
Click for more Info
Additional Remote Controls
- Spare remote controls for the T1 Series Ductless System
Price:
.00
Click for more Info
Filter Medias
- Inserts into Filter Screen Slot
- Choice of 4 Filtration Medias
Price:
.00 - .00
Click for more Info
Wired Thermostat
- Permanently Hard Mounts
- Controls Settings w/ Remote
Price:
.00
Click for more Info
Swap 1-12k Mount for Suspended Ceiling:
(+)
Swap 2-12k Mount for Suspended Ceiling:
(+)
Swap 1- 12k Mount for Wall Mounted:
(-) 0
Swap 2- 12k Mount for Wall Mounted:
(-) 0
*If alternate air handler types are preferred, contact us and request invoice with preferred options. Availability fluctuates.
View the Mini Split FAQ >
View the Mini Split Outline Diagram >
Click to contact us >